Baumatic PI645 Manual do Utilizador descarregar pdf (Página 18)

minus (5)

and timer plus (7) buttons, to set the

o The countdown time will appear on

the timer display (6).

o When the countdown time that you require appears on the timer

The countdown will start immediately. An acoustic signal will

ther cooking zones switched on,

they will not switch off at the end of the countdown time.

nsor

d by

If the cooking zone temperature sensor records too high a

o If the bottom of the pan is not fully in contact with the middle of

trol may

down the appliance. This indicates that the

been installed properly or the opening for air

ventilation is not large enough. Steps should be taken to rectify

this immediately.

o Immediately use the timer

countdown time that you requir

display (6), stop pressing the timer minus (5) and timer plus

(7) buttons.

o The number on the timer display (6) will flash for five second

After it has stopped flashing, the countdown time is set.

sound at the end of the countdown time that you have set. The

zone that has been linked to timer will switch off.

o IMPORTANT: If you have any o

Cooking zone temperature se

A temperature sensor is situated in the middle of each cooking zone

and is in contact with the glass.

o In the event of a cooking zone overheating, this will be note

the temperature sensor.

temperature, then the electronic circuit will shut down the

appliance.

o A cooking zone overheating could be caused by an empty

saucepan being placed on an active zone.

a cooking zone, then the cooking zone temperature con

not function correctly.

o IMPORTANT: If the cooking zone temperature sensor

consistently shuts

hob has not

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sem comentários

Baumatic PI645 Manual do Utilizador Página 18