Baumatic P61SS Manual do Utilizador Página 1

1P61SS/P62SS Pythagora 60cmgas hobP67SS/P68SS Pythagora 70cmgas hob

10Using the gas hobIMPORTANT: You should clean the hob surface (see“Cleaning and maintenance” section).The following symbols will appear on the contro

11Energy saving tipso The diametre of the bottom of the pan should correspond to thatof the burner.o The burner flame must never extend beyond the dia

12CleaningCleaning operations must only be carried out whenthe hob is cool.The appliance should be disconnected from yourmains supply before commencin

13o IMPORTANT: Make sure that you reassemble the burners in theoriginal way.InstallationThe installation must be carried out by a CORGIregistered inst

14PositioningThe adjacent furniture must be able to withstand aminimum temperature rise of 85°C above the ambienttemperature of the room it is located

15Unpacking the applianceWhen unpacking the appliance please check that the following itemsare contained within the packaging:1 x Baumatic hob2 x Pan

16o Carefully turn the hob upside down and place it on a cushionedmat.o Apply the sealing strip (A) provided around the edge of theappliance.o The pro

17o Place the clamp (B) over the holes that match the size of thescrews. There are one set of screw holes in each corner of thehob. Slightly tighten a

18Ventilation requirementso The room containing the cooker should have an air supply inaccordance with the current edition of BS 5440: Part 2:o The ro

19o In the UK, CORGI registered installers work to safe standards ofpractice. The cooker must also be installed in accordance withthe current edition

2User Manual for your BaumaticP61SS/P62SS Pythagora 4 burner 60cmgas hobP67SS/P68SS Pythagora 5 burner 70cmgas hobYou will be mineNOTE: This User Inst

20o Unscrew the injector (B) and replace itwith the stipulated injector for the new gassupply (see table below).o Reassemble all the burners carefully

21o Lightly smear the cone with high temperature grease,reassemble into position and rotate a few times.o Remove the cone again and remove any excess

22Replacing the mains supply cableIf the mains supply cable is damaged, then it must be replaced by anappropriate replacement which can be obtained fr

23My appliance isn’t working correctlyIMPORTANT: If your appliance appears not to beoperating correctly, then you should disconnect itfrom your mains

24Baumatic Ltd. Conditions of GuaranteeDear Customer,Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and

25Baumatic LtdYou will be mineHeadquartersBaumatic Ltd.Baumatic Buildings,6 Bennet Road,Reading,BerkshireRG2 0QX, United KingdomSales Telephone+44 118

26

3ContentsEnvironmental note 4Important safety information 5 – 7Specifications 8Product & Aperture dimensions 8Product specifications 8Standard acc

4Environmental noteo The packaging materials that Baumatic uses are environmentallyfriendly and can be recycled.o Please discard all packaging mat

5Important safety informationYour safety is of the utmost importance to Baumatic.Please make sure that you read this instruction bookletbefore attempt

6Child Safetyo Baumatic strongly recommend that babies and young childrenare prevented from being near to the appliance and not allowedto touch the ap

7o Great care should be taken whilst using this appliance and whenfollowing the cleaning procedure.o You should not use a steam jet or any other high

8SpecificationsP61SS & P62SSProduct dimensions:Height: 500 mmWidth: 585 mmDepth: 35 mmAperture dimensions:Height: 480 mmWidth: 560 mmP67SS &

9Gas detailsConnection: Rp ½ (ISO R7)Type: Natural Gas (20.9 mbar), alternative LPG G30(28-30 mbar), town gas G110 – 120 (8 mbar)to order.For future r