Baumatic BHI615 Manual do Utilizador descarregar pdf (Página 16)

o If a cooking zone is selected but no pan is detected, the pan

sensor system will check for the presence of a pan

approximately every few seconds. If no pan is detected after 1

minute the hob will automatically switch off

o You should check that your pans are suitable for use on an

induction zone hob (see the pan manufacturer’s trademark or

instructions).

Cookware that is suitable for an induction hob

The table below shows cookware that is normally suitable for use on

an induction zone hob:-

Cookware Suitable

Steel, enamelled steel Yes

Cast iron Yes

Stainless steel Yes (if stated by the pan

manufacturer)

Aluminium, copper, brass No

Glass, ceramic, porcelain No

o The bottom of the pans should be as flat and thick as possible.

o Certain types of cookware may result in a noise being made

when being used on an induction zone hob. This does not mean

that there is an appliance fault.

o IMPORTANT: You should make sure that all pans are placed in

the centre of the induction zone that you are using.

The hob timer (minute minder)

Your hob has a timer which will countdown a period of time between 1

and 99 minutes. At the end of the countdown period an audible signal

will sound.

o Press the ON/OFF button to turn the hob on. You

can use the minute minder even if you are not

selecting a cooking zone.

o Press the timer button to enter the minute

minder setting mode. The timer indicator will

flash and the default countdown time of “10”

minutes will appear in the display.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sem comentários

Baumatic BHI615 Manual do Utilizador Página 16