Baumatic B17.8SS Manual do Utilizador descarregar pdf (Página 19)

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

o In case of power failure, the burners can be lit by carefully using

a match.

Automatic ignition (BT62.1SS/B68.1SS)

To ignite a burner:

o Press in the control knob of the burner that you wish to light and

turn it anti-clockwise to the maximum position.

o If you keep the control knob depressed, the automatic ignition

for the burner will operate.

o Once the burner is lit, turn the control knob to your required

setting between the maximum and minimum setting symbols.

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

o In case of power failure, the burners can be lit by carefully using

a match.

Automatic ignition with flame failure safety device

(B17.8SS/B68.1TCSS/BG67.1SS/BT62.1SS)

The appliance is fitted with a flame failure safety device on each

burner, which is designed to stop the flow of gas to the burner head in

the event of the flame going out.

To ignite a burner:

o Press in the control knob of the burner that you wish to light and

turn it anti-clockwise to the maximum position.

o If you keep the control knob depressed, the automatic ignition

for the burner will operate.

o You should hold down the control knob for 20 seconds after the

flame on the burner has lit.

o After this 20 second interval, turn the control knob to your

required setting between the maximum and minimum setting

symbols.

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Sem comentários

Baumatic B17.8SS Manual do Utilizador Página 19