Baumatic B17.8SS Manual do Utilizador descarregar pdf (Página 18)

o Never select a knob position between the maximum and off

position.

o The symbol on the control panel, next to the control knob will

indicate which gas burner it operates.

Pushbutton ignition (B46.1SS)

o Press in and turn the appropriate control knob anti-clockwise to

the large flame symbol.

o Whilst pressing in the control knob, press and hold down the

ignition button, which is located on the control panel.

o The ignition spark will operate, you should hold down the ignition

button until the flame on the burner has lit.

o To regulate the flame, you should continue turning the control

knob anti-clockwise until the flame is at a suitable level. The

operating position MUST be at a position between the maximum

and minimum position.

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

o In case of power failure, the burners can be lit by carefully using

a match.

Pushbutton ignition with flame failure safety device

(B46.1TCSS/B60.3SS/BT61.1SS)

The appliance is fitted with a flame failure safety device on each

burner, which is designed to stop the flow of gas to the burner head in

the event of the flame going out.

o Press in and turn the appropriate control knob anti-clockwise to

the large flame symbol.

o Whilst pressing in the control knob, press and hold down the

ignition button, which is located on the control panel.

o You should hold down the ignition button for 20 seconds after

the flame on the burner has lit.

o After this 20 second interval, turn the control knob to your

required setting between the maximum and minimum setting

symbols.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Sem comentários

Baumatic B17.8SS Manual do Utilizador Página 18