Baumatic PHC720SS Manual do Utilizador descarregar pdf (Página 15)

o Use the plus (4) or minus (5) buttons of the dual circuit zone

that you wish to use and select a power level between 1 and 9.

o The central section of the duel circuit zone will switch on.

o If you wish to also activate the outer section of a duel circuit

zone, you should press the dual circuit ON/OFF button (8). The

dual circuit indicator neon (9) will light.

Turning off a dual circuit’s outer section

o Both zones of the dual circuit most be switched on.

o Press the dual circuit ON/OFF button (8).

o The dual circuit indicator neon (9) will go out and the outer

section will switch off.

Residual heat indicator

o After a zone is switched off, the corresponding

cooking zone indicator (6) will show the letter “H”,

alternating with “0”. This means that the

temperature of the zone is over 60°C and is

therefore high enough to cause injury.

o If you switch off the appliance using the ON/OFF button (1) then

only the “H” will appear in the cooking zone indicator (6).

o When the temperature falls below 60°C, then the letter “H” and

“0” will stop alternating (if the hob is still switched on), or the

“H” will go out (if the hob is not switched on).

o IMPORTANT: The residual heat indicator will disappear if your

mains supply is cut.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sem comentários

Baumatic PHC720SS Manual do Utilizador Página 15