Baumatic BKF24ID Manual do Utilizador descarregar pdf (Página 29)

o Open the terminal block on the underside of the hob.

o Unscrew the terminal screws fixing the cable.

o Replace the cable with one of the same length and in accordance

with the specification given on page 27.

o The “green-yellow” earth wire must be connected to the terminal

marked . It must be about 10 mm longer than the live and

neutral wires.

o The “blue” neutral wire must be connected to the terminal

marked with letter (N) - the live wire must be connected to the

terminal marked with letter (L).

My appliance isn’t working correctly

o The cooking zones are not functioning or will not switch

on.

* The safety lock has been switched on (see the “Safety lock”

section for information on how to turn off the safety lock).

* Several cooking zone selection buttons have been pressed at

once. You should only touch one cooking zone selection button at

once.

* The safety cut out has been triggered. Press a cooking zone

selection button to reset the hob.

* Check that the mains electrical supply to the appliance is correct

and working. Check the mains fuse.

* The pans that you are using are not suitable for use on an

induction hob.

o The residual heat indicator has not come on after I have

switched a cooking zone off.

* The cooking zone has only been turned on for a short period of

time; therefore it did not go above 60°C.

* IMPORTANT: If the cooking zone does appear to be hotter than

60°C and the residual heat indicator has not come on, you

should call for an Authorised Service Agent.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Sem comentários

Baumatic BKF24ID Manual do Utilizador Página 29