Baumatic BHI660BE Manual do Utilizador descarregar pdf (Página 29)

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the aperture. This will make it difficult to remove the hob

from the aperture in future,

particularly

if it needs to be serviced.



o Carefully lower the hob into the aperture hole that you have cut

out.



o There are holes on the base of the hob that you can fix the brackets

to.



You should place the bracket on the underneath of the hob, in a

position that is appropriate for the aperture that you have cut out.

Using the screws provided, fix the bracket to the hob. These screws

MUST be securely tightened.



Electrical connection



This appliance must be installed by a qualified

person in accordance with the latest edition of the

I.E.E.

Regulations

and in

compliance

with Baumatic’s

instructions.



Before connecting the appliance, make sure that the supply voltage

marked on the rating plate corresponds with your mains supply

voltage.



WARNING:

THIS

APPLIANCE

MUST BE EARTHED.



o This appliance must be wired into a 32A double pole switched

fused spur outlet, having 3 mm contact separation and placed in

an easily accessible position adjacent to the appliance. It should

not be located above the appliance and no more than 1.25m

away from it.



o The spur outlet must still be accessible even when your hob is

located in its

operating

position.



o Cable type: H05 RRF 3 core x 6 mm² (not supplied).



1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários

Baumatic BHI660BE Manual do Utilizador Página 29

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Baumatic BHI660BE