Baumatic BFI40SS Manual do Utilizador descarregar pdf (Página 14)

Residual heat indicator

o After a zone is switched off, the corresponding

cooking zone indicator (3) will show the letter “H”.

This means that the temperature of the zone is

over 60°C and is therefore still high enough to

cause injury.

o If the zone falls below 60°C and there are still other zones

switched on, a “0” will appear on the cooking zone indicator (3).

o IMPORTANT: The residual heat indicator will disappear if your

mains supply is cut.

Pan sensor

Each zone has a sensor on it, so it can detect the presence of a pan.

o The sensor is fine-tuned to detect a pan being placed on it. The

pan should be one size smaller than the nominal diameter of the

zone.

o If the symbol shown above appears on a cooking zone indicator

(3) after you have placed a pan on a cooking zone and selected

it; this means that the pan is either the incorrect size or shape.

Or it could be made from a material that is inappropriate for use

on an induction zone hob.

o If a cooking zone is selected but no pan is detected, the pan

sensor system will check for the presence of a pan

approximately every 2 seconds.

o You should check that your pans are suitable for use on an

induction zone hob (see the pan manufacturer’s trademark or

instructions).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sem comentários

Baumatic BFI40SS Manual do Utilizador Página 14