Baumatic BE2.1SS Manual do Utilizador descarregar pdf (Página 10)

Using the hob

Before first use

IMPORTANT: You should clean the hob surface and solid

plates (see “Cleaning and maintenance” section).

o You should switch on one cooking zone at a time, for 5 minutes

at the maximum setting. This will help to eliminate any new

smell that exists and evaporate any humidity that has formed on

the heating elements during transit.

o When doing this burn off process, an appropriately sized

saucepan containing cold water should be placed on the zone in

question.

o Do not burn off more than one zone at once.

Control knobs

o All operations are performed by means of the 2 control knobs

that can be found at the front of the hob top.

o The control knobs can be turned either clockwise or anti-

clockwise to select a heating level. The numbers around the

outside of each control knob indicates the power level that you

have set the zone to.

o A marking to the bottom left of each control knob, indicates

which zone that it controls.

Switching on a zone and setting a power level

o Turn the control knob of the zone that you wish to cook on,

clockwise or anticlockwise until it reaches the power level that

you desire.

o Each cooking zone can be adjusted between 1 and 6, one being

the coolest zone setting and six being the hottest zone setting.

o When you have finished cooking, make sure that you turn the

control knob anti-clockwise, to the 0 position.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sem comentários

Baumatic BE2.1SS Manual do Utilizador Página 10