Baumatic PHC720SS Manual do Utilizador descarregar pdf (Página 18)

o When the temperature falls below 60°C, then the letter “H” and

“0” will stop alternating (if the hob is still switched on), or the

“H” will go out (if the hob is not switched on).

o IMPORTANT: The residual heat indicator will disappear if your

mains supply is cut.

Locking the hob top

o The whole hob top can be locked by

pressing the safety lock button (2)

whilst the appliance is turned on.

o The safety lock neon (3) will light to

show that the safety lock feature has

been switched on.

o When the safety lock feature is activated, it will disable any of

the other buttons on the control panel, except the ON/OFF

button (1).

o To disable the safety lock feature, you should press the safety

lock button (2) again. The safety lock neon (3) will go out and

you are then able to adjust the power of any zone on the hob

top.

o IMPORTANT: If the appliance is switched off whilst the safety

lock feature is activated, then it will still be activated the next

time that you turn the appliance on. Therefore before you can

turn on a zone and set it to a power level, you will need to

deactivate the safety lock by pressing the safety lock button (2).

Safety cut-off

o If one or more of the cooking zones are accidentally left on, a

safety cut off will activate after a certain period of time. The

length of time depends on the power level that a zone or zones

have been set on.

LEVEL

TIME LIMIT

1 10 hours

2 – 3 5 hours

4 4 hours

5 3 hours

6 – 8 2 hours

9 1 hour

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sem comentários

Baumatic PHC720SS Manual do Utilizador Página 18