Baumatic P630SS Especificações descarregar pdf (Página 22)

Electrical connection

Make certain the nominal a.c. power supply voltage corresponds to that indicated on the

identication data plate. To connect the appliance directly to the supply mains, a means for

disconnection having a contact separation in all poles that provide full disconnection under

overvoltage category III conditions, must be incorporated in the xing wiring, according with the

wiring rules.

The oven must be connected to an efcient earth system, as prescribed by national and/or local

statutory regulations.

The cable must be connected as prescribed by statutory regulations and respond to the

specications indicated on the Technical Data page.

The terminal box is located at the rear of the appliance. If a new cable is tted, route it through

the clamp and make the connections as shown in the diagram. The earth wire must be cut longer

than the other wires so that it will be the last to break off in the event of the cable being tugged.

Having made the connection, tighten the cable clamp and close the cover of the box.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Sem comentários

Baumatic P630SS Especificações Página 22