Baumatic BHC700 Manual do Utilizador descarregar pdf (Página 19)

o Carefully turn the hob upside down and place it on a cushioned

mat.

o Apply the sealing strip provided around the edge of the

appliance.

o The protective covering must be removed from both sides.

o Do not leave a gap in the sealing agent or overlap the thickness.

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the aperture. This will make it difficult to remove the hob

from the aperture in future, particularly if it needs to be

serviced.

o Carefully turn the hob back over and then gently lower it into the

aperture hole that you have cut out.

o There are holes on the

base or the sides of

the hob that you can

fix the four brackets

to. There are three

holes in each one of

the brackets.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Baumatic BHC700 Manual do Utilizador Página 19