Baumatic BHC635SS Manual do Utilizador descarregar pdf (Página 26)

o This appliance must be wired into a 35 A double pole switched

fused spur outlet, having 3 mm contact separation and placed in

an easily accessible position adjacent to the appliance. It should

not be located above the appliance and no more than 1.25m

away from it.

o The spur outlet must still be accessible even when your hob is

located in its operating position.

o Cable type: H05 RRF 3 core x 6 mm²

Connecting the mains supply cable

o The mains terminal block is located on the underside of the hob

and the terminals are accessible by removing the terminal block

cover by removing the cover screw.

o The brass links must be positioned as marked in the appropriate

diagram and once established ALL terminal screws must be

tightened down firmly.

o If when the hob is first switched on, only two of the zones

work, you should recheck that the terminal screws are all

fully tightened between the links. This should be done

before contacting the Baumatic Customer Care

Department.

o IMPORTANT: The appliance must NOT be connected to the

mains supply by means of a 13A plug and socket.

o The cable can be looped if necessary, but make sure that is not

kinked or trapped when the hob is in position. Care must be

taken to avoid the cable being in contact with hot parts of the

appliance.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

Baumatic BHC635SS Manual do Utilizador Página 26