Baumatic BF18SS Manual do Utilizador descarregar pdf (Página 15)

Residual heat indicator

o After a zone is switched off, the corresponding

cooking zone indicator (3) will show the letter “H”.

This means that the temperature of the zone is

over 60°C and is therefore high enough to cause

injury.

o The letter “H” will disappear once the temperature of the zone

has fallen below 60°C.

o IMPORTANT: The residual heat indicator will disappear if your

mains supply is cut for longer than 3 seconds.

Locking the hob top

o The whole hob top can be locked by pressing

the safety lock button (9) whilst the

appliance is turned on.

o The safety lock neon (12) will light to show

that the safety lock feature has been switched

on.

o When the safety lock feature is activated, it will disable any of

the other buttons on the control panel, apart from the ON/OFF

button (1). If you press this button, the appliance will still turn

off.

o To disable the safety lock feature, you should press the safety

lock button (9) again. The safety lock neon (12) will go out and

you are then able to adjust the power of any zone on the hob

top.

o IMPORTANT: If the appliance is switched off whilst the safety

lock feature is activated, then it will still be activated the next

time that you turn the appliance on. Therefore before you can

turn on a zone and set it to a power level, you will need to

deactivate the safety lock by pressing the safety lock button (9).

Safety cut-off

o If one or more of the cooking zones are accidentally left on, a

safety cut off will activate after a certain period of time. The

length of time depends on the power level that a zone or zones

have been set on.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sem comentários

Baumatic BF18SS Manual do Utilizador Página 15