BRT200 Built-in double door fridge/freezer
Using your Baumatic fridge freezer Before switching on o Make sure that it has been installed by a suitably qualified person, as per the informatio
Switching on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the ther
12re within this IMPORTANT: If you run the appliance with the thermostat dial on a higher setting (over <5>) for prolonged periods, there is t
o Cold dishes/cooked food should be covered and can be placed on any shelf. o Fruit and vegetables should be cleaned thoroughly and placed in the s
Freezing fresh food o To freeze the maximum quantity of fresh food specified on the rating plate, you should turn the thermostat dial to position
o Do not place bottles (glass or tin) containing liquids (especially sparkling liquids) into the freezer as they could cause the bottle to burst dur
o Do not use abrasive products, detergents or soaps. o After washing the appliance, wipe over the area that you have cleaned with a damp cloth
Defrosting the freezer compartment o The frost in the freezer compartment should be removed periodically. You can use a plastic scraper to keep do
Replacing the light bulb 18WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO REPLACE THE LIGHT
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on
USER MANUAL FOR YOUR BAUMATIC BRT200 Built-in double door fridge/freezer NOTE: This User Instruction Manual contains impor
20Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the
Reversing the doors of your appliance The doors of your fridge freezer can be set to open from the left or the right. If you want the doors to be hin
o Remove both of the top hinge screws (1) that hold the top hinge (2) in place and then remove the top hinge. o Remove the freezer door by lifting
o The seal must adhere properly all the way around the door. o If either seal is not adhering to the cabinet properly, then you should either:- 1.
The height of the aperture needs to be between 1445 - 1465 mm. o If required use filler shelves to occupy any additional space that you have in the
Installing your fridge freezer a) Place the appliance into the housing unit. Position the appliance towards the left hand side wall, leaving a gap o
c) Fix the lower hinge receivers to the base of the housing unit (as shown in the picture opposite). d) Once the appliance is in position,
f) Loosen the screws on the right hand middle hinge and then slide the right hand centre bracket towards the housing unit. Fix it to the side wall o
My fridge freezer does not appear to be working/there is no power to my appliance. o Check that the plug is fully inserted into the power socket.
o IMPORTANT: It is normal to get some ice droplets forming on the back wall of the appliance. The formation of ice droplets does not indicate an app
Contents Environmental note 4 Important safety information 5 – 6 Specifications of your BRT200 fridge freezer 7 - 9 Description
Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Amperova 495 Baumatic Buildings, 46215, Librec 6 Bennet Road, Czech Repub
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useles
Important safety information se of the appYour safety is of the utmost importance to Baumatic. Please make sure that you read this instruction bookl
Child safety 6o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the app
Specifications of your BRT200 fridge freezer Dimensions of appliance Height: 1445 mm Width: 540 mm Depth: 540 mm Dimensions of aperture* Height
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appl
Description of the product features 1) Safety glass shelves o These shelves may be placed in any of the guide slots within the interior of the appl
Comentários a estes Manuais